Zanussi ZDV12001FA User Manual

ENUser manualDishwasherZDV 12001FA

set the right level of the water softener. Thismakes sure that the water softener uses thecorrect quantity of dishwasher salt and water.Using salt, ri

3To remove filters (B)and (C), turn the han-dle counterclockwiseand remove. Pullapart filter (B) and(C). Wash the filterswith water.A4Remove filter (A

Alarm code Problem• The indicator of the set programme flashes contin-uously.• The end indicator flashes 2 times intermittently.The appliance does not

Technical informationDimensions Width / Height / Depth (mm) 446 / 818 - 898 / 550Electrical connection Refer to the rating plate. Voltage 220-240 V

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 117925361-A-382012

ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 4Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• The appliance is to be connected to the wa-ter mains using the new supplied hose-sets.Old hose sets must not be reused.• Before you connect the appl

Product description1234986751Lower spray arm2Filters3Rating plate4Rinse aid dispenser5Detergent dispenser6Salt container7Water hardness dial8Upper spr

Programme1)Degree of soilType of loadProgramme pha-sesDuration(min)Energy(kWh)Water(l) 2)Fresh soilCrockery and cut-leryWash 65 °CRinse30 0.8 9 3)Norm

Before first use1. Make sure that the set level of the watersoftener agrees with the water hardness inyour area. If not, adjust the water softener.Con

Electronic adjustment1. Press the on/off button to activate the appli-ance.2. Make sure that the appliance is in settingmode. Refer to ‘SETTING AND ST

-MAX1234+-AFill the rinse aid dis-penser when the lens(A) is clear.To adjust the re-leased quantity ofrinse aid, turn the se-lector between posi-tion

Using the combi detergent tabletsWhen you use tablets, that contain salt andrinse aid, do not fill the salt container and therinse aid dispenser.1. Ad