Zanussi ZFC21400WA User Manual download pdf (Page 8)

the outer environment humidity and if the frozen

food is not wrapped properly.

The best time to defrost the freezer when it

contains no or only a little food.

1. Switch off the appliance.

2. Remove any stored food, wrap it in several

layers of newspaper and put it in a cool

place.

3. Leave the lid open , remove the plug from

the defrost water drain and collect all

defrost water on a tray. Use a scraper to

remove ice quickly.

4. When defrosting is completed, dry the

interior thoroughly and refit the plug.

5. Switch on the appliance.

6. Set the temperature regulator to obtain the

maximum coldness and run the appliance

for two or three hours using this setting.

7. Reload the previously removed food into the

compartment.

Periods of non-operation

When the appliance is not in use for long

periods, take the following precautions:

1. Switch off the appliance and disconnect the

appliance from electricity supply.

2. Remove all food

3. Defrost and clean the appliance and all

accessories.

4. Leave the lid open to prevent unpleasant

smells.

If the cabinet will be kept on, ask

somebody to check it once in a

while to prevent the food inside from

spoiling in case of a power failure.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Solution

The appliance does not operate. The appliance is switched off. Switch on the appliance.

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

There is no voltage in the mains

socket.

Connect to a different electrical

mains socket. Contact a qualified

electrician.

The appliance is noisy. The appliance is not supported

properly.

Check if the appliance stands

stable.

Audible or visual alarm is on. The cabinet has been recently

switched on or the temperature

in the appliance is too high.

Refer to "High Temperature

Alarm" and if the problem still oc-

curs contact the nearest Author-

ized Service Centre.

Power indicator light is flashing. An error has occurred in measur-

ing the temperature or the appli-

ance is not working properly.

Contact the nearest Authorized

Service Centre.

The lid doesn't close completely. Food packages are blocking the

lid.

Arrange the packages in the right

way, see the sticker in the appli-

ance.

There is excessive frost. Eliminate excess frost.

8 www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comments to this Manuals

No comments

Zanussi ZFC21400WA User Manual Page 8

Comments to this Manuals

Related products and manuals for Freezers Zanussi ZFC21400WA