Zanussi ZFX31401WA User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
15
www.zanussi.com
defrosting process, other than those recommended by the manufac-
turer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compart-
ments of the appliance, unless they are of the type recommended by
the manufacturer.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral deter
-
gents. Do not use abrasive products, abrasive cleaning pads, sol-
vents or metal objects.
Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the manufac
-
turer, its service agent or similarlyqualified persons in order to avoid
a hazard.
Installation
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied
with the appliance.
Always be careful when you move the ap-
pliance because it is heavy. Always wear
safety gloves.
Make sure the air can circulate around the
appliance.
Wait at least 4 hours before connecting the
appliance to the power supply. This is to
allow the oil to flow back in the compressor.
Do not install the appliance close to
radiators or cookers, oven or hobs.
The rear of the appliance must stand
against the wall.
Do not install the appliance where there is
direct sunlight.
Do not install this appliance in areas that
are too humid or too cold, such as the
construction appendices, garages or wine
cellars.
When you move the appliance, lift it by the
front edge to avoid scratching the floor.
Electrical connection
WARNING! Risk of fire and electrical
shock.
The appliance must be earthed.
All electrical connections should be made
by a qualified electrician.
Make sure that the electrical information on
the rating plate agrees with the power sup-
ply. If not, contact an electrician.
Always use a correctly installed shockproof
socket.
Do not use multi-plug adapters and exten-
sion cables.
Safety Instructions
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

Comments to this Manuals

No comments