Zanussi ZRB36104XA User Manual download pdf (Page 11)

2. Gently move the transparent cover up and

down and at the same time unhook it in the

direction of the arrows .

3. Replace the lamp with an original spare

part or as an alternative it is possible to use

the Osram PARATHOM SPECIAL T26 0.8

Watts bulb. Another alternative is to use an

incandescent bulb lamp specifically de-

signed for household appliances (see also

SAFETY INFORMATION chapter) with

maximum power not exceeding the light dif-

fuser indication.

4. Install the lamp cover.

5. Connect the appliance to the mains socket.

6. Open the door. Make sure that the lamp

turns on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "In-

stallation".

3. If necessary, replace the defective door

gaskets. Contact the Service Center.

Technical data

Dimension

Height 1845 mm

Width 595 mm

Depth 642 mm

Rising Time 30 h

Voltage 230-240 V

Frequency 50 Hz

The technical information are situated in the rat-

ing plate on the internal left side of the appli-

ance and in the energy label.

Installation

Caution! Read the "Safety Information"

carefully for your safety and correct

operation of the appliance before installing the

appliance.

Positioning

Install this appliance at a location where the am-

bient temperature corresponds to the climate

class indicated on the rating plate of the appli-

ance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Location

The appliance should be installed well away

from sources of heat such as radiators, boilers,

direct sunlight etc. Ensure that air can circulate

www.zanussi.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Zanussi ZRB36104XA User Manual Page 11

Comments to this Manuals

Related products and manuals for Freezers Zanussi ZRB36104XA