Zanussi ZI9280D User Manual download pdf (Page 8)

CUSTOMER SERVICE AND SPARE PARTS

If the appliance is not functioning properly, check

that:

¥ the plug is firmly in the wall socket and the mains

power switch is on;

¥ there is an electricity supply (find out by plugging

in another appliance);

¥ the thermostat knob is in the correct position.

¥ If there are water drops on the bottom of the

cabinet, check that the defrost water drain

opening is not obstructed (see ÒDefrostingÓ

section).

¥ If your appliance is still not working properly after

making the above checks, contact the nearest

service centre.

To obtain fast service, it is essential that when you

apply for it you specify the model and serial number

of your appliance which can be found on the

guarantee certificate or on the rating plate located

inside the appliance, on the bottom left-hand side.

PR138

2. remove any stored food, wrap it in several layers

of newspaper and put it in a cool place;

3. leave the door open, place a basin on the top

shelf of the refrigerator compartment, under the

drain hole, remove the plug as shown in figure..

4. when defrosting is completed, dry the interior

thoroughly; refit the plug;

5. turn the thermostat knob back to the required

setting or replace the plug in the power socket.

6. After two or three hours, reload the previously

removed food into the compartment.

Important:

Never use sharp metal tools to scrape off frost

from the evaporator as you could damage it.

Do not use a maechanical device or any artificial

means to speed up the thawing process other

than those recommended by the manufacturer.

A temperature rise of the frozen food packs,

during defrosting, may shorten their safe

storage life.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Zanussi ZI9280D User Manual Page 8