Zanussi ZRB33100WA User Manual download pdf (Page 13)

Electrical connection

• Before plugging in, ensure that the voltage

and frequency shown on the rating plate

correspond to your domestic power supply.

• The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power

supply socket is not earthed, connect the

appliance to a separate earth in compliance

with current regulations, consulting a

qualified electrician.

• The manufacturer declines all responsibility if

the above safety precautions are not

observed.

• This appliance complies with the E.E.C.

Directives.

Door reversibility

WARNING!

Before carrying out any operations,

remove the plug from the power

socket.

CAUTION!

To carry out the following

operations, we suggest that this be

made with another person that will

keep a firm hold on the doors of the

appliance during the operations.

1. Open the door and empty the shelves.

2. Unscrew the screws of the upper hinge (1).

2

1

3. Remove the door from the middle hinge

pivot (2).

4. Place the cover of the upper hinge into the

holes on the opposite side.

5. Screw off the screws of the middle hinge

(3).

6. Remove the plugs on the upper side of both

doors and move them to the other side.

7. Remove the lower door from the lower

hinge pivot (4).

4

3

8. Screw off the pivot of the lower hinge (5)

and screw the lower hinge pivot (6) into the

left drill of the lower hinge.

5

6

9. Screw off the screws of the lower hinge

and remove the hinge (8).

10. Screw off the lower cover plugs and screw

them into the hole on the opposite side (7).

11. Put the lower hinge on the opposite side

and fix it with the screws (8).

7

8

12. Place the lower door on the lower hinge

pivot (9).

13. Screw off the middle cover plugs and screw

them into the hole on the opposite side

(10).

14. Put the middle hinge on the opposite side

and fix it with the screws (11).

www.zanussi.com 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments