Zanussi ZOP37902XK User Manual download pdf (Page 21)

from the top panel. Make sure the glass slides

out of the supports completely.

Clean the glass panels with water and soap.

Dry the glass panels carefully.

When the cleaning is completed, install the

glass panels and the oven door. Do the above

steps in the opposite sequence.

Make sure that you put the glass panels (A and

B) back in the correct sequence. The middle

panel (B) has a decorative frame. The screen-

printing zone must face the inner side of the

door. Make sure that after the installation the

surface of the glass panel frame (B) on the

screen-printing zones is not rough when you

touch it.

A B

Make sure that you install the middle panel of

glass in the seats correctly.

A

B

Replacing the lamp

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING!

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

CAUTION!

Always hold the halogen lamp with a

cloth to prevent grease residue from

burning on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

You cannot activate or operate

the oven.

The oven is not connected to an

electrical supply or it is connec-

ted incorrectly.

Check if the oven is correctly

connected to the electrical sup-

ply (refer to the connection dia-

gram if available).

www.zanussi.com 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments