ENUser manualFreezerZBF22451SA
PositioningInstall this appliance at a location where the am-bient temperature corresponds to the climateclass indicated on the rating plate of the ap
1 Loosen the upperpin and remove thespacer.2 Remove the upperpin and the door.3 Loosen the lowerpin.On the opposite side:1 Install the lowerpin.2 Inst
EEDCB7 Attach the covers(C, D) to the lugs andthe hinge holes.Install the vent grille(B).Attach the hinge cov-ers (E) to the hinge.Ha HbHdHc8 Disconne
Environmental concernsThe symbol on the product or on itspackaging indicates that this product may notbe treated as household waste. Instead itshoul
14 www.zanussi.com
15www.zanussi.com
www.zanussi.com/shop 222365781-A-082013
ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If the refrigerant circuit should become dam-aged:– avoid open flames and sources of ignition– thoroughly ventilate the room in which theappliance is
• The appliance must not be located close toradiators or cookers.• Make sure that the mains plug is accessibleafter the installation of the appliance.
3. To disconnect the appliance from the pow-er disconnect the mains plug from the pow-er socket.Temperature regulationThe set temperature of the freez
Daily useFreezing fresh foodThe freezer compartment is suitable for freezingfresh food and storing frozen and deep-frozenfood for a long time.To freez
• water ices, if consumed immediately after re-moval from the freezer compartment, canpossibly cause the skin to be freeze burnt;• it is advisable to
Problem Possible cause SolutionThe compressor does notstart immediately afterpressing the Fast Freezebutton, or after changingthe temperature.This is
Important! Do not pull, move or damage anypipes and/or cables inside the cabinet.Never use detergents, abrasive powders, highlyperfumed cleaning produ
Comments to this Manuals