Zanussi ZWD14791W User Manual download pdf (Page 27)

Positioning

Install the machine on a flat hard floor. Make sure that air

circulation around the machine is not impeded by carpets,

rugs etc. Check that the machine does not touch the wall

or other kitchen units. Level the washing machine by rais-

ing or lowering the feet. The feet may be tight to adjust as

they incorporate a self locking nut, but the machine MUST

be level and stable. If necessary, check the setting with a

spirit level. Any necessary adjustment can be made with a

spanner. Accurate levelling prevents vibration, noise and

displacement of the machine during operation.

Caution! Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

Rubber feet kit (4055126249)

Available from your authorized dealer.

The rubber feet are particularly recommended on floating,

slippery and wooden floors.

Mount the rubber feet to prevent vibration, noises and dis-

placement of the appliance during operation.

Read carefully the instructions supplied with the kit.

Installation on suspended flooring

Suspended wooden floors are particularly susceptible to

vibration.

To help prevent vibration we recommend you place a wa-

terproof wood panel, at least 15 mm thick under the appli-

ance, secured to at least 2 floor beams with screws, the

wood panel must extend beyond the front feet.

If possible install the appliance in one of the corners of

the room, where the floor is more stable.

Warning! The appliance should NOT be placed on

deep pile carpeting.

Note!

Please ensure that when the appliance is installed it is

easily accessible for the engineer in the event of a

breakdown.

Water inlet

Warning! This appliance must be connected to a

cold water supply.

1. Connect the water inlet hose supplied with the ma-

chine to a tap with a 3/4" thread. Always use the

hose supplied with the appliance.

Important! Do not use the hose from your previous

machine to connect to the water supply.

2. The other end of the inlet hose which connects to the

machine can be turned as showed in the picture.

Do not place the inlet hose downwards.

Angle the hose to the left or right depending on the

position of your water tap.

45°

35°

www.zanussi.com

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Comments to this Manuals

No comments

Zanussi ZWD14791W User Manual Page 27

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWD14791W