Zanussi ZWD14791W User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required, pour it into the main
wash compartment
or in the appropriate compartment
if the selected programme/option it requires (see more de-
tails in «Detergent dispenser drawer»).
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
«MAX» mark in the drawer). Close the drawer gently.
Select the required programme by turning the
programme selector dial (1)
Turn the programme selector dial to the required pro-
gramme. The washing machine will propose a temperature
and automatically select the maximum spin value provi-
ded for the programme you have chosen. You can change
these values by operating the corresponding buttons. The
green pilot light of the button 8 starts to flash.
The selector dial can be turned either clockwise or coun-
terclockwise. Turn to position
to reset programme/
Switching the machine off.
At the end of the programme the selector dial must be
turned to position
, to switch the machine off.
Caution! If you turn the programme selector dial to
another programme when the machine is working,
the red pilot light of button 8 will blink 3 times and the
message Err is displayed to indicate a wrong selection.
The machine will not perform the new selected
programme.
Programme Option buttons
Depending on the programme, different functions can be
combined. These must be selected after choosing the de-
sired programme and before pressing the button 8.
Select the temperature by pressing button 2
By selecting a programme, the appliance proposes auto-
matically a default temperature.
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
different temperature.
Reduce the spin speed by pressing button 3
By selecting a programme, the appliance proposes auto-
matically the maximum spin speed provided for that pro-
gramme.
Press button 3 repeatedly to change the spin speed, if you
want your laundry to be spun at a different speed.
Select an additional rinse
This appliance is designed for saving water. However, for
people with a very delicate skin (allergic to detergents) it
may be necessary to rinse the laundry using an extra
quantity of water (Extra Rinse). To activate this option
press simultaneously the buttons 4 and 6 for a couple of
seconds. The Extra Rinse icon will appear on the display.
This function stays permanently on. To remove it press
the buttons 4 and 6 again until the Extra Rinse icon disap-
pears.
8
www.zanussi.com
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Comments to this Manuals

No comments