Zanussi ZWF 14070W1 User Manual download pdf (Page 20)

Malfunction Possible Cause / Solution

The machine fills then empties

immediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «water drainage»

section.

The machine does not empty and/or

does not spin:

The drain hose is squashed or kinked.

(Red Start/ Pause pilot light flashes)

• Check the drain hose connection.

The drain pump is clogged.

(Red Start/Pause pilot light flashes)

• Clean the drain pump.

The option or has been selected.

• Select the Drain or Spin programmes

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

There is water on the floor:

Too much detergent or unsuitable detergent (creates

too much foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the

inlet hose fittings. It is not always easy to see this as

the water runs down the hose; check to see if it is

damp.

• Check the water inlet hose connection.

The inlet hose is damaged.

• Replace it with a new one.

The cap on the emergency emptying hose has not

been replaced after cleaning the pump.

• Refit the cap on the emergency emptying hose

and place the latter back in its seat.

Unsatisfactory washing results:

Too little detergent or unsuitable detergent has been

used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to

washing.

• Use commercial products to treat the stubborn

stains.

The correct temperature was not selected.

• Check if you have selected the correct

temperature.

Excessive laundry load.

• Reduce the laundry load.

126.2936.42…ZWF10070-12070-14070.qxd 14/7/08 12:59 Página 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comments to this Manuals

No comments

Zanussi ZWF 14070W1 User Manual Page 20

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWF 14070W1