Zanussi ZWG5140P User Manual download pdf (Page 23)

The filter is inserted correctly when the

indicator on its top is visible and

blocked.

• close the filter cov-

er;

• insert the mains

plug again.

Cleaning the water inlet filters

Important! If the appliance doesn't fill, it takes

a long time to fill with water, the starting button

flashes red or the display (if available) shows

the relevant alarm (see chapter "What to do

if..." for more details), check if the water inlet

filters are blocked .

To clean the water inlet filters:

• Turn off the water

tap.

• Unscrew the hose

from the tap.

• Clean the filter in

the hose with a stiff

brush.

• Screw the hose back onto the tap. Make

sure the connection is tight.

• Unscrew the hose

from the appliance.

Keep a towel near-

by because some

water may flow.

• Clean the filter in

the valve with a

stiff brush or with

the piece of cloth.

• Screw the hose back to the appliance and

make sure the connection is tight.

• Turn on the water tap.

What to do if…

The appliance does not start or stops during

operation. Certain problems are due to lack of

simple maintenance or oversights, which can

be solved with the help of the indications de-

scribed in the charts, without calling out an en-

gineer.

During appliance operation it is possible that

the red pilot light of the button 6 flashes and

one of the indicator pilot lights illuminates to in-

dicate that the appliance is not working.

Before contacting your local Service Centre,

please carry out the checks listed below.

Fault code and mal-

function

Possible cause - Solution

The light of button 6 flashes and the light 7.1 illuminates: Problem with the water

supply

www.zanussi.com

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Comments to this Manuals

No comments

Zanussi ZWG5140P User Manual Page 23

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWG5140P