Zanussi ZWG5140P User Manual download pdf (Page 26)

Malfunction Possible cause / Solution

The appliance vibrates

noisily:

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The appliance is not levelled correctly.

• Adjust the feet.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Spinning starts late or

the appliance does not

spin:

The electronic unbalance detection device has cut in because the laundry is

not evenly distributed in the drum. The laundry is redistributed by reverse rota-

tion of the drum. This may happen several times before the unbalance disap-

pears and normal spinning can resume. If, after 10 minutes, the laundry is still

not evenly distributed in the drum, the appliance will not spin. In this case, re-

distribute the load manually and select the spin programme.

• Load more laundry.

The load is too small.

• Add more items, redistribute the load manually and then select the spinning

programme.

No water is visible in

the drum:

Appliances based on modern technology operate very economically using very

little water without affecting performance.

Unsatisfactory washing

results

Too little detergent or unsuitable detergent has been used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to washing.

• Use commercial products to treat the stubborn stains.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

The appliance makes an

unusual noise

The appliance is fitted with a type of motor which makes an unusual noise

compared with other traditional motors. This new motor ensures a softer start

and more even distribution of the laundry in the drum when spinning, as well as

increased stability of the appliance.

After completing these checks, switch on the

appliance and press the button 6 to restart the

programme.

If the malfunction shows again, contact your

Service Centre. The necessary data for the

service centre is on the rating plate. We recom-

mend that you write the data here:

www.zanussi.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Comments to this Manuals

No comments

Zanussi ZWG5140P User Manual Page 26

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWG5140P