Zanussi ZBB24430SA User Manual download pdf (Page 9)

Problem Possible cause Solution

Many products are stored at the same

time.

Store less products at the same time.

There is no cold air circulation in the

appliance.

Make sure that there is cold air circula-

tion in the appliance.

Replacing the lamp

Caution! Disconnect the plug from the mains

socket.

Remove the screw from

the lamp cover.

Remove the lamp cover

(refer to the illustration).

Replace the used lamp

with a new lamp of the

same power and specifi-

cally designed for house-

hold appliances (the maxi-

mum power is shown on

the lamp cover).

Install the lamp cover.

Tighten the screw to the

lamp cover.

Connect the plug to the

mains socket.

Open the door. Make sure

that the light comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets.

Contact the Service Center.

Technical data

Dimension of the recess

Height 1446 mm

Width 560 mm

Depth 550 mm

Rising Time 20 h

Voltage 230-240 V

Frequency 50 Hz

The technical information are situated in the rating plate

on the internal left side of the appliance and in the energy

label.

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Zanussi ZBB24430SA User Manual Page 9

Comments to this Manuals

Related products and manuals for Combi-fridges Zanussi ZBB24430SA