Zanussi ZHI 600 Instruction Manual download pdf (Page 12)

A: Built-in Electric Hob: 650mm clearance

B: Built-in Gas hob: 700mm clearance

C: Slot-in Electric Cooker: 685mm clearance

D: Slot-in Gas Cooker: 787mm clearance

Hob

Clearance Height

A clearance height of 650mm (25 1/2 ”) is required when

installed above a built-in electric hob, or 700mm (27 1/2

”) when installed above a built-in gas hob.

A clearance height of 685mm (27”) is required when

installed above a slot-in electric cooker, or 787mm (30

1/2 ”) when installed above a slot-in gas cooker.

When installed between adjoining wall

cabinets, the wall cabinets must not overhang

the hob and the distance between the

underside of the cabinet and the worktop must

be 450mm. If the height of the wall cabinet is

less than 450mm, a gap of 50mm must be

maintained either side of the hob.

This cooker hood must not be installed above

a cooking appliance with a high level grill.

Unpacking

The fittings supplied to install this cooker

hood can be found with the instruction book

inside the packaging.

The fixing kit comprises:

2 - Wall fixing brackets

6 - Decor panel fixing screws

4 - Security fixing screws

Fitting the Wall Brackets

1. Use the paper template provided to mark the hole

positions on the wall for the bracket fixing screws

(not supplied).

2. Check the hole distances are correct with a tape

measure as stated on the template.

3. At this stage it is important to allow 15mm

(1/2”) clear space above the cooker hood to

enable it to be hooked onto the brackets and for

subsequent removal for decorating or servicing.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Zanussi ZHI 600 Instruction Manual Page 12