Zanussi DA4142 User Manual

Instruction Book - part 1- Before use - Maintenance - Installation1ContentsImportant safety information 2Before use 3Setting the water softener 3Filli

10Something not workingCertain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out anengineer

11If after all these checks, the problem persists, contact yourlocal Service Force Centre, quoting the model and serialnumber. This information can be

12Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.Any plumbing work requir

13min 30 cmmax 100 cmmax 100 cm+ 2 m maxCS10Ø 18Ø 21Water outlet hose connectionThe end of the drain hose can be connected in the followingways: 1. To

14Electrical connectionThis appliance must be earthed.The manufacturer declines any responsibility should this safety measure not be observed.If the p

1 09/01

Installation● This appliance is heavy. Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this pr

3Before useBefore using your dishwasher for the firsttime:1. Ensure that the electrical and water connections comply with the installation instruction

4Filling with saltAttention!Only use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in di

5Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, and spot and streak free drying.The dispenser, which is p

6Use of detergent Only use detergents specifically designed for use in dishwashers.We recommend the use of Finish detergents which areavailable in the

7To save energyPlace dishes in the machine immediately after every mealand wait until the dishwasher is full before washing.If necessary run the Rinse

8Internal cleaningEnsure that the seals around the door, the detergent andrinse aid dispensers are cleaned regularly with a dampcloth.We recommend the

9External cleaningClean the external surfaces of the machine and controlpanel with a damp soft cloth. If necessary use only neutraldetergents. Never u