Zanussi DA4341 User Manual download pdf (Page 12)

Water outlet hose connection

The end of the drain hose can be connected in the following

ways:

1. To the sink outlet spigot, securing it if necessary with a

clip.

2. Hooked over the edge of the sink using the special

curved plastic guide (if provided).

3. To a stand pipe provided with vent-hole, minimum internal

diameter 4 cm.

The waste connection must be at a height of between 30 cm

(minimum) and 100 cm (maximum) from the bottom of the

dishwasher.

The drain hose can face either to the right or left of the

dishwasher

Ensure the hose is not bent or squashed as this could

prevent or slow down the discharge of water.

If you use a drain hose extension it must be no longer than 2

metres and its internal diameter must be no smaller than the

diameter of the hose provided.

Likewise the internal diameter of the couplings used for

connections to the waste outlet must be no smaller than the

diameter of the hose provided.

Electrical connection

Before plugging the appliance into the wall socket, make

sure that:

1. The mains voltage corresponds to the voltage given in

the "Technical specifications".

2. The meter, fuses, mains power supply and wall socket

can all take the maximum load required.

Make sure that the socket and plug are compatible

without having to use any type of adaptor. If necessary,

have the domestic wiring system socket replaced.

Safety standards require the appliance to be

earthed.

The manufacture accepts no liability for failure to

observe the above safety precautions.

This appliance complies with the following E.E.C. Directives:

- 73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

min 30 cm

max 100 cm

min 4 cm

Ø 21

Ø 18

CS09

max 100 cm

min 30 cm

max 100 cm

+ 2 m max

CS10

Ø 18

Ø 21

Attention!

Our appliances are supplied with a security

device to protect against the return of dirty

water back into the machine.

If the spigot of your sink has a "no return

valve" incorporated this can prevent the

correct draining of your dishwasher.

We advise you therefore to remove it.

1 2 ... 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Zanussi DA4341 User Manual Page 12

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi DA4341