Zanussi DE6544 User Manual

DISHWASHERDE 6544INSTRUCTION BOOK152977 29/1UK

10Loading your applianceBefore placing dishes in the machine, remove anyscraps of food, to avoid clogging the filters andconsequently reducing the per

US4711The cutlery basketLong bladed knives stored in an upright position are a potential hazard.These items should only be placed in the removable kni

12In case that plates are loaded in the upper basket:load them starting from the rear positions of the basket; tilting them slightly forwards and avoi

13Use of detergent Only use detergents specifically designed for use in dishwashers.We recommend the use of Finish detergents whichare available in th

14To save energyPlace dishes in the machine immediately after everymeal and wait until the dishwasher is full beforewashing.Do not prewash dishes unde

Washing programmes15Type of loadDegree of soilHeavy soil.Crockery, cutlery, pots and pansNormal soil.Crockery and cutleryFresh soil.Crockery and cutle

161. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the ON-OFF push buttonThe ON

17The dishwasher has finished the programme only when the end of programme indicator light is illuminated.If you do not wait for the end of the progra

18Internal cleaningEnsure that the seals around the door, the detergentand rinse aid dispensers are cleaned regularly witha damp cloth.We recommend th

19Check that the SID is not clogged with detergentresidue. If necessary rinse it under running waterafter having removed it from the basket by twistin

2For the userImportant safety information 3Description of the appliance 4The control panel 5Before use 6Setting the water softener 6Rinse aid 9Using y

20Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling outan engineer. The dishwasher is f

21If after all these checks, the problem persists,contact your local Service Force Centre, quoting themodel and serial number. This information can be

22Hints for test centresBefore starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinseaid dispe

23Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.Any plumbing work requir

24Water outlet hose connectionThe end of the drain hose can be connected in thefollowing ways: 1. To the sink outlet spigot, securing it if necessary

25Electrical connectionThis appliance must be earthed.The manufacturer declines any responsibility should this safety measurenot be observed.If the pl

26Fitting under a counter(kitchen worktop or sink)By removing the machine’s worktop, you can install itunder a close fitting sink unit or a pre-existi

©Electrolux Household Appliances Limited 2001From the Electrolux Group. The world’s No.1 choice.The Electrolux Group is the world’s largest producer o

3Installation● This appliance is heavy. Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this p

41. Levelling spacers2. Upper basket stop3. Salt container4. Large filter5. Detergent dispenser6. Control panel7. Rating plate8. Rinse aid dispenser9.

51. ON-OFF indicator light2. ON-OFF push button3. Door handle4. Programme selection push buttons5. Indicator lightsPhase indicator lightsWashing phase

6Before using your dishwasher for thefirst time:1. Ensure that the electrical and water connections comply with the installation instructions2. Remove

7The current level is indicated by the number of flashes made by the INTENSIVE SID 80 indicator light, that alternates 5 seconds off with a number of

8Filling with saltOnly use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in a dishwasher

9Rinse aid Rinse aid is automatically added during the lastrinse, ensuring thorough rinsing, and spot andstreak free drying. The dispenser, which ispo