Zanussi ZDT311 User Manual download pdf (Page 11)

3.

Press function button A, the lights function

buttons B and C turn off while the light of

function button A goes flashing, at the

same time the end of programme indica-

tor light starts to flash, along with a se-

quence of intermittent audible signals. The

current level is indicated by the number of

flashes of the end of programme indicator

light with a sequence of intermittent audible

signals and a pause of a few seconds.

Examples:

5 flashes / 5 intermittent audible signals,

pause,

5 flashes / 5 intermittent audible signals,

pause, etc...= level 5

6 flashes / 6 intermittent audible signals,

pause,

6 flashes / 6 intermittent audible signals,

pause, etc...= level 6

4. To change the level press the function but-

ton A. Each time button is pressed the level

changes (For the selection of a new level

see the chart).

Examples:

If the current level is 5, by pressing function

button A once, level 6 is selected. If the

current level is 10, by pressing button A

once, level 1 is selected.

5. To memorise the operation, switch off the

dishwasher by pressing the On/Off button.

Filling with dishwasher salt

CAUTION!

Use only special salt suitable for dishwashers.

Unscrew the cap.

Only before filling with

salt for the first time, fill

the salt container with wa-

ter.

Using the funnel provided,

pour in the salt until the

container is filled with salt.

11

Downloaded from DishWasher-Manual.com Manuals

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments