GETTING STARTED?EASY.User ManualZBB28450SAEN User ManualFridge Freezer
Problem Possible cause SolutionWater flows on the rear plateof the refrigerator.During the automatic defrost-ing process, frost melts on therear plate
INSTALLATIONWARNING! Refer to Safety chapters.POSITIONINGThis appliance can be installed in a dry, wellventilated indoor where the ambient temperature
VENTILATION REQUIREMENTSThe airflow behind the appliance must be sufficient.5 cmmin. 200cm2min.200cm2DOOR REVERSIBILITY1. Loosen and remove the upper
The lower hinge cover (in the accessories bag)makes sure that the distance between theappliance and the kitchen furniture is correct.Make sure that th
HbHa8 mm22. Remove the brackets and mark a distance of 8mm from the outer edge of the door where thenail must be fitted (K).Ha8 mmK23. Place the small
the symbol with the household waste. Return theproduct to your local recycling facility or contactyour municipal office.15*
WWW.ZANUSSI.COM/SHOP222372094-A-222015
SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible if a
• Clean the appliance with a moist soft cloth. Only use neutraldetergents. Do not use abrasive products, abrasive cleaningpads, solvents or metal obje
• Do not touch the compressor or the condenser.They are hot.• Do not remove or touch items from the freezercompartment if your hands are wet or damp.•
However, the exact setting should be chosenkeeping in mind that the temperature inside theappliance depends on:• room temperature• how often the door
The maximum amount of food that can be frozen in24 hours is specified on the rating plate, a labellocated on the inside of the appliance.The freezing
• For safety, store in this way only one or twodays at the most.• Cooked foods, cold dishes, etc. : these shouldbe covered and may be placed on any sh
This operation will improve the performance ofthe appliance and save electricity consumption.DEFROSTING OF THE REFRIGERATORFrost is automatically elim
WHAT TO DO IF...Problem Possible cause SolutionThe appliance does not oper-ate.The appliance is switched off. Switch on the appliance. The mains plug
Comments to this Manuals