Zanussi ZRB36104XA User Manual download pdf (Page 12)

freely around the back of the cabinet. To ensure

best performance, if the appliance is positioned

below an overhanging wall unit, the minimum

distance between the top of the cabinet and the

wall unit must be at least 100 mm . Ideally, how-

ever, the appliance should not be positioned

below overhanging wall units. Accurate levelling

is ensured by one or more adjustable feet at the

base of the cabinet.

Warning! It must be possible to

disconnect the appliance from the mains

power supply; the plug must therefore be easily

accessible after installation.

A

B

min

100mm

20mm

Levelling

When placing the ap-

pliance ensure that it

stands level. This can

be achieved by two

adjustable feet at the

bottom in front.

Electrical Connection

Caution! Any electrical work required to

install this appliance should be carried out

by a qualified electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be observed.

AB

C

D

E

Important! The wires in the mains lead are

coloured in accordance with the following code:

A Green and Yellow: Earth

C Brown: Live

D Blue: Neutral

As the colours of the wires in the mains lead of

this appliance may not correspond with the col-

oured markings identifying the terminals in your

plug, proceed as follows:

1. Connect the wire coloured green and yel-

low to the terminal marked either with the

letter “E“ or by the earth symbol

or col-

oured green and yellow.

2. Connect the wire coloured blue to the ter-

minal either marked with the letter “N“ or

coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the “L“ or col-

oured red.

4. Check that no cut, or stray strands of wire

is present and the cord clamp E is secure

over the outer sheath.

12

www.zanussi.com

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments