Zanussi ZRX71100WA User Manual download pdf (Page 17)

Hints for ice-maker compartment

• Water ices, if consumed immediately after

removal from the ice-maker compartment,

can possibly cause the skin to be freeze

burnt;

• Do not open the ice-maker compartment

door too often and do not leave open longer

than necessary.

Care and cleaning

Caution! Unplug the appliance before

carrying out any maintenance operation.

This appliance contains hydrocarbons in

its cooling unit; maintenance and re-

charging must therefore only be carried out by

authorized technicians.

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with luke-

warm water and some neutral soap.

• regularly check the door seals and wipe

clean to ensure they are clean and free from

debris.

• rinse and dry thoroughly.

Important! Do not pull, move or damage any

pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders,

highly perfumed cleaning products or wax

polishes to clean the interior as this will

damage the surface and leave a strong odour.

Clean the condenser (black grill) and the com-

pressor at the back of the appliance with a

brush. This operation will improve the perform-

ance of the appliance and save electricity con-

sumption.

Important! Take care of not to damage the

cooling system.

Many proprietary kitchen surface cleaners

contain chemicals that can attack/damage the

plastics used in this appliance. For this reason

it is recommended that the outer casing of this

appliance is only cleaned with warm water

with a little washing-up liquid added.

After cleaning, reconnect the equipment to the

mains supply.

Defrosting of the ice-maker

compartment

A certain amount of frost will always form

around the ice-maker compartment.

Important! Defrost the ice-maker

compartment when the frost layer reaches a

thickness of about 3-5 mm.

To remove the frost, do these steps:

1. Turn the Temperature regulator to the "0"

setting and disconnect the mains plug

from the mains socket.

2. Empty the ice box.

3. Leave the door of the appliance and ice-

maker compartment open.

4. Defrosting usually takes several hours.

When finished, pour defrost water gath-

ered out of the tray and wipe the surfaces

dry.

5. Insert the plug into the wall socket and

turn the thermostat control to a medium

setting.

Warning! Never use sharp metal tools to

scrape off frost from the evaporator as

you could damage it. Do not use a mechanical

device or any artificial means to speed up the

thawing process other than those

recommended by the manufacturer.

Periods of non-operation

When the appliance is not in use for long peri-

ods, take the following precautions:

1. disconnect the appliance from electricity

supply

2. remove all food

3. defrost and clean the appliance and all

accessories

17

www.zanussi.com

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Comments to this Manuals

No comments