Zanussi ZGG62417XA User Manual download pdf (Page 9)

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob

with a moist cloth and non-abrasive

detergent. After cleaning, wipe the hob dry

with a soft cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy water

and dry them carefully before you put them

back on.

Periodic maintenance

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep the

knob pushed for equal or less

than 10 seconds.

The flame ring is uneven. Burner crown is blocked with

food residues.

Make sure that the injector is not

blocked and the burner crown is

clean.

If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre. Give the data from the rating

plate. Make sure, you operated the hob

correctly. If not the servicing by a service

technician or dealer will not be free of charge,

also during the warranty period. The instructions

about the Service Centre and conditions of

guarantee are in the guarantee booklet.

www.zanussi.com 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments