Zanussi ZGG96624XA User Manual download pdf (Page 6)

Control knob

Symbol Description

no gas supply / off position

Symbol Description

ignition position / maximum

gas supply

minimum gas supply

Daily use

WARNING!

Refer to Safety chapters.

Burner overview

A

B

D

C

C

D

A

B

A) Burner cap

B) Burner crown

C) Ignition candle

D) Thermocouple

Ignition of the burner

Always light the burner before you

put on the cookware.

WARNING!

Be very careful when you use open

fire in the kitchen environment. The

manufacturer declines any

responsibility in case of the flame

misuse.

1. Push the control knob down and turn it

counterclockwise to the maximum gas

supply position ( ).

2. Keep the control knob pushed for equal or

less than 10 seconds. This lets the

thermocouple warm up. If not, the gas

supply is interrupted.

3. Adjust the flame after it is regular.

If after some tries the burner does

not light, check if the crown and its

cap are in correct positions.

WARNING!

Do not keep the control knob

pushed for more than 15 seconds. If

the burner does not light after 15

seconds, release the control knob,

turn it into off position and try to light

the burner again after minimum 1

minute.

6 www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments