ENUser manualHobZGO76534IE GB
LocationThe hob may be located in a kitchen, a kitchen/diner or bed sitting room (with a volume greaterthan 20 m³), but not in a bathroom or showerroo
Adjustment of minimum levelTo adjust the minimum level of the burners:1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.
ABCDEA) Green and YellowB) 3 amp fuseC) BrownD) Cord clampE) BlueThe wires in the cord are coloured as follows:Green and yellow - EarthBlue - NeutralB
ABA) supplied sealB) supplied bracketsCaution! Install the appliance only on aworktop with flat surface.Possibilities for insertionKitchen unit with d
Electric supply: 230 V ~ 50 Hz3 core flexible cable with non rewireable plug fitted with a 3 amp car-tridge fuseCategory: II2H3+Gas connection: R 1/2&
15www.zanussi.com
www.zanussi.com/shop 397226202-A-462012
ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _ _
• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off the a
• The electrical installation must have an isola-tion device which lets you disconnect the ap-pliance from the mains at all poles. The isola-tion devi
• Do not install a flame diffuser on the burner.Care and CleaningWarning! Risk of damage to theappliance.• Clean regularly the appliance to prevent th
If after some tries the burner does notlight, check if the crown and its cap are incorrect positions.CBAA) Burner cap and crownB) ThermocoupleC) Ignit
Warning! Refer to the Safety chapters.Energy savings• If possible, always put the lids on the pans.• When the liquid starts to boil, turn down theflam
Removing the dirt:1. – Remove immediately: melting plastic,plastic foil, and food containing sugar.– Stop the appliance and let it cooldown before you
Labels supplied with the accessories bagStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO
Comments to this Manuals