Zanussi ZGO76534BA User Manual

GETTING STARTED?EASY.User ManualZGO76534BAEN User ManualHobGB IE

min 5 mm(max 150 mm)min 30 mm60 mmBAA. Removable panelB. Space for connectionsKitchen unit with ovenThe electrical connection of the hob and the ovenm

BURNER OVERVIEWABCA. Burner cap and crownB. ThermocoupleC. Ignition candleABCDA. Burner capB. Burner crownC. Ignition candleD. ThermocoupleIGNITION OF

HINTS AND TIPSWARNING! Refer to Safety chapters.COOKWARECAUTION! Do not use cast iron pans,potstones, earthenware, grill or toasterplates.WARNING! Do

4. For the burner to operate correctly, make surethat the arms of the pan supports are alignedwith the centre of the burner.CLEANING THE HOB• Remove i

LABELS SUPPLIED WITH THE ACCESSORIESBAGStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.03

OTHER TECHNICAL DATATOTAL POWER:Gas original: G20 (2H) 20 mbar = 10,5 kWGas replacement: G30 (3+) 28-30 mbar = 763 g/hG31 (3+) 37 mbar = 750 g/hElectr

Energy efficiency per gas burner(EE gas burner)Left middle - Triple Crown 53.5%Centre rear - Semi-rapid 56.9%Right rear - Semi-rapid 56.9%Centre front

17

18

19

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

WWW.ZANUSSI.COM/SHOP867321971-D-402018

• CAUTION: The cooking process has to be supervised. A shortterm cooking process has to be supervised continuously.• WARNING: Danger of fire: Do not s

WARNING! Risk of injury or damageto the appliance.• Remove all the packaging.• Do not install or use a damaged appliance.• Follow the installation ins

• Use this appliance in a household environment.• Do not change the specification of thisappliance.• Make sure that the ventilation openings are notbl

INSTALLATIONWARNING! Refer to Safety chapters.BEFORE THE INSTALLATIONBefore you install the hob, write down theinformation bellow from the rating plat

CAUTION! It is important to install theelbow correctly, with the shoulder onthe end of the thread, fitted to the hobconnecting pipe.CAUTION! Failure t

The appliance is supplied with a 3 core flexiblepower cable with a 3 amp plug. If it is necessary tochange the fuse, use a 3 amp ASTA-approved (BS1362

2.3.min. 55 mmmin. 650 mm560 mmmin. 150 mm30 mm480 mmmin. 600 mm4.50 mm400 mmIf a furniture unit is installed at adistance of 400 mm above thehob, the