Zanussi ZNC12X User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
2 zanussi
Contents
Safety information 2
Product description 8
Accessories 9
Before first use 10
Operation 11
Care and cleaning 14
Technical data 15
Installation 16
Environmental information 18
European guarantee 19
Safety information
The built-in safety interlock switches
prevent the microwave oven from
operating when the door is open.
Do not tamper with them, or attempt to
operate the oven with the door open as
open door operation can result in
exposure to microwave energy.
Do not allow food spills or cleaner residue
to accumulate on door sealing surfaces.
See the Cleaning and Care section for
cleaning instructions.
It is particularly important that the oven
door closes properly and that there is no
damage to the: (1) door (warped), (2)
hinges and latches (broken or insecure),
(3) door seals and sealing surface.
Warning: If the door, hinges/latches or
door seals are damaged, the microwave
must not be operated until it has been
repaired by an authorized service person.
Warning: It is hazardous for anyone
except factory trained service personnel to
service or make adjustments to this oven.
Contact your nearest authorised service
agent if service should be required.
Do not remove the outer case, door or
control panel at any time. Doing so may
cause exposure to extremely high voltage.
Install or locate this oven only in
accordance with ‘installation instructions
found in this manual.
Use the appliance for its intended use as
described in this manual. Do not use
corrosive chemicals in this appliance. This
type of oven is specifically designed to
heat, cook, or defrost food. It is not
designed for industrial or laboratory use
neither for commercial use as this will
invalidate the guarantee.
Do not operate the oven empty. If food or
water is not present to absorb the
Downloaded From Microwave-Manual.com Manuals
Page view 1
1 2 3 4 5 6 7 ... 19 20

Comments to this Manuals

No comments