Zanussi ZCV46330WA User Manual download pdf (Page 17)

1. Clean the oven floor with warm water and

washing up liquid, then dry it.

2. Set the oven temperature to 250 °C and let

the oven operate for 1 hour.

3. When the appliance is cool, clean it with a

soft and moist sponge.

Removing and cleaning the door

glasses - top oven

The door glass on your product can

be different in type and shape from

the examples you see in the graphic.

The number of glasses can also be

different.

1. Open the door.

2. Hold the door trim on the top edge of the

door at the two sides and push inwards to

release the clip seal.

1

2

1

3. Pull the door trim to the front to remove it.

4. Remove the glass panels.

To install panels, do the same steps in reverse.

Removing and cleaning the door

glasses

The door glass on your product can

be different in type and shape from

the example you see in the graphic.

The number of glasses can also be

different.

1. Push the door trim at one side to remove it.

1

2

A

2.

Pull up the trim.

3. Remove the glass panels.

To replace the glass panels, do the

same steps in reverse. Before you

lower the trim, attach the A trim part

to the door. Refer to the graphic.

Replacing the lamp

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING!

Danger of electrocution! Disconnect

the fuse before you replace the

lamp. The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back

of the cavity.

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300

°C heat-resistant oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

www.zanussi.com 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments