Zanussi ZTE7101PZ User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
End/Anticrease - the maximum dry
laundry
Drying - the more dry laundry
End/Anticrease and Drying the
standard dry laundry
4. Press the button (D) again and again until the
indicator of the correct level comes on.
5. To confirm the adjustment, press and hold
buttons (B) and (D) at the same time for
approximately 2 seconds.
BEFORE FIRST USE
Before you use the appliance for the first time do
these operations:
Clean the tumble dryer drum with a moist cloth.
Start a short programme (e.g. 30 minutes) with
moist laundry.
DAILY USE
START A PROGRAMME
1. Prepare the laundry and load the appliance.
CAUTION! Make sure that when
you close the door, the laundry
does not catch between the
appliance door and the rubber
seal.
2. Set the correct programme and options for the
type of load.
3. Press the Start/Pause touchpad.
The programme starts.
CHANGE A PROGRAMME
1. Turn the Programme knob to OFF
2. Set the programme.
AT THE END OF THE PROGRAMME
When the programme is completed:
An intermittent acoustic signal operates (If the
Buzzer function is on).
The indicators End/Anticrease and Filter
comes on.
The Start/Pause indicator is on.
The appliance continues to operate with the crease
guard phase for approximately other 30 minutes.
The crease guard phase removes creases from
your laundry.
You can remove the laundry before the crease
guard phase is completed. We recommend, for
better results, that you remove the laundry when the
phase is almost completed or completed.
When the crease guard phase is completed:
Start/Pause indicator goes off.
1. Turn the Programme knob to OFF
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Always clean the filter when a
programme is completed.
STAND-BY FUNCTION
To decrease the energy consumption, this function
automatically deactivates the appliance:
After 5 minutes if you do not start the
programme.
After 5 minutes from the end of the programme.
INDICATOR LIGHTS
These lights indicate the following functions:
Drying : This light indicates that the
appliance is in the drying phase.
End/Anticrease
: This light is on at the end of
the cooling phase, during the anticreasing
phase and at the end of the programme.
Filter : This light illuminates at the end of the
programme to remind you that the filters must
be cleaned.
HINTS AND TIPS
PREPARING THE LAUNDRY
Close the zippers.
Close the fasteners of the duvet covers.
26
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Comments to this Manuals

No comments