Zanussi FCS825C User Manual download pdf (Page 7)

- 7 -

6 Button ”Start/Pause”

This button has two functions:

Start: Press the button in order to start the required

programme. The corresponding indicator lamp

is lit. The indicator lamp for ”Locked” in the pro-

gramme progress display is lit and the door is

locked.

Pause: To interrupt a programme which is running, press

the button. The corresponding indicator lamp

starts to flash. To continue the programme, press

the button again.

7 Programme progress display

When you select a wash programme, the light corres-

ponding to the various phases of the programme goes on.

When the programme has started, the display will allways

show which section of the choosen programme the

machine is performing, or if is finished.

= pre wash/main wash

= rinses

= spin

= end

= locked

: the light comes on when the machine is performing

the washing phase (main wash). If you have choosen

the ”Pre wash” option by pressing that button, the light

will be on during the pre wash phase too.

: end of programme.

: the light indicates if the door can be opened:

● the light is lit: the door can not be opened

● the light is out: the door can be opened

● the light flashes: the door can soon be opened

8 Spin speed or function

With this selector you can reduce the final spin speed or

select the ”No spin” option. The speeds are applied

for the ”white-” and ”coloured” programmes.

● The position 800 is equivalent to 800 rpm/min for the

synthetic and wool programmes and 700 rpm/min for

the delicate wash programme.

● The position 400 is equivalent to 400 rpm/min for all

the wash programmes.

”No spin”, by selecting this option all the spinning

phases are excluded. To be used for extremely

delicate material. The machine will add 3 extra

rinses to the cotton programmes and 1 extra rinse

to the synthetic programmes.

”Rinse Hold”, when selecting this position the

water of the last rinse is not drained to prevent

the laundry from creasing. The lights ”End” and

”Locked” on the programme progress display are

lit when the programme is finished and indicating

that the water must be drained before the door

can be opened.

To drain the water:

1. Turn the programme selector to the ”Reset”

position.

2. Choose the programme ”Drain” or ”Spin” .

You can reduce the spin speed by turning the

selector.

3. Press in the Start/Pause button.

9 Programme selector

The selector is divided into 5 sections:

● Cotton

● Synthetic

● Delicate

● Wool

● Special programmes

Turn the programme selector clockwise or anticlockwise

to select the programme and temperature according to

the care label, or one of the special programmes.

= cold, the water is not heated

= resets, cancels the programme, switches the

machine off.

If you turn the programme selector to an other

programme when the machine is working, the

lights in the programme progress display starts

to flash. The machine will not perform the new

selected programme.

When the programme is finished, the pro-

gramme selector must be turned back to the

reset position.

192996970_GB.qxd 07/07/2008 16.45 Page 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Comments to this Manuals

No comments

Zanussi FCS825C User Manual Page 7

Comments to this Manuals

Related products and manuals for Washing machines Zanussi FCS825C