Zanussi FLS602 User Manual download pdf (Page 15)

ENGLISH

Something Not Working

Mod. ..........

Prod. No. ...........

Ser. No. .........

Mod.

..........

Ser.

P0042

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out

an engineer. Before contacting your Local service Force Centre, please carry out the checks listed below.

Symptom Possible causes

If after all these checks, the problem persists, contact

your local Service Force Centre, quoting the model and

serial number. This information can be found on the

rating plate (see picture).

Please note that it will be necessary to provide proof of

purchase for any in-guarantee service calls. In-guarantee

customers should ensure that the above checks have

been made as the engineer will make a charge if the

fault is not a mechanical or electrical breakdown.

The machine does not start up:

■ Check that the door is firmly closed.

■ Check that the machine is plugged in and that there is power at the

socket.

■ Check that the main fuse has not blown.

■ Check that the programme selector dial is positioned correctly and pulled

out.

The machine does not fill:

■ Check that the water tap is open.

■ Check that water is coming out of the tap.

■ Check that the inlet hose is not squashed or kinked.

■ Check that the filter in the inlet hose is not blocked.

■ Check that the door is closed.

The machine fills then empties

immediately:

■ The end of the drain hose is too low. Refer to relevant paragraph in

“water drainage” section.

The machine does not empty and/or

does not spin:

■ Check that the drain hose is not squashed or kinked.

■ The drain filter is blocked. Clean it.

■ The Rinse Hold option has been selected.

There is water on the floor:

■ Too much detergent or unsuitable detergent (creates too much foam) has

been used.

■ Check whether there are any leaks from one of the inlet hose fittings. It

is not always easy to see this as the water runs down the hose; check to

see if it is damp.

■ Check that the drain hose is not damaged.

■ Check that the drain filter has been refitted correctly after cleaning.

Unsatisfactory washing results:

■ Too little detergent or unsuitable detergent has been used.

■ Stubborn stains have not been treated prior to washing.

■ The correct temperature or programme was not selected.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi FLS602 User Manual Page 15

Comments to this Manuals

Related products and manuals for Washing machines Zanussi FLS602