Zanussi Z816WT85BI User Manual download pdf (Page 12)

Before proceeding with appliance building in, bring it

near the recess and preposition the inlet hose, the

drain hose and the mains cable.

WARNING! Make sure they are not

kinked or squashed.

INSTALLING ANTI-TILTING DEVICE

(ACCESSORY)

Install this accessory in case of risk of appliance tilting only.

If the height of the counter is 820 mm or lower, you cannot install the anti-tilting device.

1. Remove the screws of the top cover on the rear of

the appliance and install the anti-tilting device as

shown in the drawing.

~10mm

2. Adjust the anti-tilting device so that the distance

from the counter is 10mm. Loosen the nut counter-

clockwise with a 3mm wrench. Adjust the height and

turn the nut clockwise to fix it.

PREPARATION AND ASSEMBLY OF THE CUPBOARD DOOR

The dimensions of the cupboard door should be:

• width min. 595 - max. 598 mm;

• thickness 16-22 mm.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

No comments

Zanussi Z816WT85BI User Manual Page 12