Zanussi ZWF3145 User Manual download pdf (Page 18)

Make sure that the impeller of the pump can turn. If this

does not occur, contact the service centre.

Clean the filter under the water tap and put it back in the

pump into the special guides.

Make sure that you tighten correctly the filter to prevent

leakages.

Close the pump door.

Caution!

When the appliance is in use and

depending on the programme selected there can be

hot water in the pump.

Never remove the pump cover during a wash cycle, always

wait until the appliance has finished the cycle, and is

empty. When refitting the pump cover, ensure it is

securely re-tightened so as to stop leaks and young

children being able to remove it.

Cleaning the water inlet filters

Important!

If the appliance doesn't fill, takes long to fill

with water, the starting button blinks yellow or the display

(if available) shows the relevant alarm (see chapter "What

to do if..." for more details), check if the water inlet filters

are blocked .

To clean the water inlet filters:

• Turn off the water tap.

• Unscrew the hose from

the tap.

• Clean the filter in the

hose with a stiff brush.

• Screw the hose back onto the tap. Make sure the

connection is tight.

• Unscrew the hose from the machine. Keep a rag

nearby because some water may flow.

• Clean the filter in the valve with a stiff brush or with

the piece of cloth.

35°

45°

• Screw the hose back to the machine and make sure

the connection is tight.

• Turn on the water tap.

Frost precautions

If the machine is installed in a place where the tempera-

ture could drop below 0°C, remove the remaining water

from the inlet hose and the drain pump.

1. disconnect the mains plug from the mains socket.

2. close the water tap

3. unscrew the water inlet hose from the tap;

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Zanussi ZWF3145 User Manual Page 18

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWF3145