Zanussi ZWF71440W User Manual download pdf (Page 11)

If you set something incorrect, the

indicator of button Start/Pause flashes

red.

STARTING A PROGRAMME WITHOUT THE

DELAY START

Press the button Start/Pause.

The corresponding indicator stops to flash.

The phase indicator illuminates and stays on.

The programme starts and the door locks.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

STARTING A PROGRAMME WITH THE DELAY

START OPTION

1. Press the button Delay Start repeatedly to set

the required delay.

The indicator of the set delay comes on.

2. Press the button Start/Pause:

• The door is locked.

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the delay

setting before you press the button

Start/Pause. After pressing the button

Start/Pause, you can only cancel the

delay.

To cancel the delay start:

a. Press the button Start/Pause to set the

appliance to pause.

The corresponding indicator flashes.

b. Press the button Delay Start once; the

indicator of the set delay goes off.

Press the button Start/Pause again to start

the programme immediately.

INTERRUPTING A PROGRAMME AND

CHANGING THE OPTIONS

You can change only some options before they

operate.

1. Press the button Start/Pause.

The indicator flashes.

2. Change the options.

3. Press the button Start/Pause again.

The programme continues.

CANCELLING A RUNNING PROGRAMME

1. Turn the programme knob to position to

cancel the programme and to deactivate the

appliance.

2. Turn the programme knob again to activate the

appliance. Now, you can set a new washing

programme.

Before starting the new programme

the appliance could drain the water. In

this case, make sure that the detergent

is still in the detergent compartment, if

not fill the detergent again.

OPENING THE DOOR

While a programme or the delay start operates, the

appliance door is locked.

CAUTION! If the temperature and

level of the water in the drum are too

high and the drum still rotates, you

cannot open the door.

To open the door during the first minutes of the

cycle or when the delay start operates:

1. Press the button Start/Pause to pause the

appliance.

2. Wait some minutes until the door unlocks.

3. You can open the door.

4. Close the door and touch the button Start/

Pause again. The programme (or the delay)

continues.

AT THE END OF THE PROGRAMME

• The appliance stops automatically.

• The indicator of the button Start/Pause goes off.

After a couple of minutes the phase indicator

illuminates and stays on.

• Turn the programme knob to position to

deactivate the appliance.

• You can open the door.

• Remove the laundry from the appliance. Make

sure that the drum is empty.

• Close the water tap.

• Keep the door and the detergent drawer ajar, to

prevent the mildew and odours.

The washing programme is completed, but

there is water in the drum:

• The drum turns regularly to prevent the creases

in the laundry.

• The indicator stays on to remind you to

drain the water.

• The indicator of the button Start/Pause is off.

The door is locked.

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments