Zanussi ZWG5100P User Manual download pdf (Page 15)

Extra Rinse

This appliance is designed for saving water. However, for people with

very delicate skin (allergic to detergents) it may be necessary to rinse the

laundry using an extra quantity of water.

Press simultaneously the buttons 4 and 5 for some seconds: the pilot

light 7.2 comes on. This function stays permanently on. To remove it

press the same buttons again until the pilot light 7.2 goes off.

Start/Pause

Start the programme by pressing the button 6

• To start the selected programme, press the button 6 , the correspond-

ing green pilot light stops flashing. The pilot light 7.1 illuminates to

indicate that the appliance starts operating and the door is locked. If

you have chosen a delayed start, the appliance will begin the countdown.

• To interrupt a programme which is running, press the button 6 : the

corresponding green pilot light starts flashing. It is possible

to change some options of a running programme before the pro-

gramme carries them out.

• To restart the programme from the point at which it was interrupted,

press the button 6 .

• After the programme has started the door is locked. If, for any reason,

you need to open the door , set firstly the appliance to PAUSE by press-

ing the button 6 . After a few minutes it will be possible to open the door.

If the door remains locked, this means that the appliance is already

heating or that the water level is too high. In any case, do not try to

force the door!

If you cannot open the door but you need to open it you have to

switch the appliance off by turning the selector dial to

. After a few

minutes the door can be opened ( pay attention to the water level and

temperature! ). After closing the door, it is necessary to select the pro-

gramme and options again and to press the button 6 .

7.1

7.2

7.3

Indicator pilot lights

• When you start the programme by pressing the button 6 , the washing

phase pilot light ( 7.1 ) illuminates. This means that the appliance is

operating.

• The additional rinses pilot light ( 7.2 ) illuminates when the appliance

perform an extra rinse.

• When the programme has finished the end cycle pilot light ( 7.3 )

comes on.

At the end of the programme

The appliance stops automatically. The pilot light of the

button 6 and the pilot light corresponding to the just fin-

ished washing phase go off. The light 7.3 illuminates.

If a programme or an option that ends with water left in

the tub has been selected and the door remains locked

to indicate that the water must be emptied out before

opening the door.

Follow the below instructions to empty out the water:

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comments to this Manuals

No comments

Zanussi ZWG5100P User Manual Page 15

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWG5100P