• Remove the power supply cable and the draining
and inlet hose from the hose holders ( C ) on the
rear of the appliance.
• Unscrew the three bolts ( A ) and remove the hose
holders ( C ).
• Slide out the relevant plastic spacers ( B ).
• Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
Positioning and levelling
Level the appliance by raising or lowering the feet. De-
pending on the model, the appliance can have four ad-
justable feet, or two front-adjustable feet and two
back fixed feet.
The appliance MUST be level and stable on a flat
hard floor. If necessary, check the setting with a spirit
level. Any necessary adjustment can be made with a
spanner.
7
Comments to this Manuals