Zanussi ZWH 6145 User Manual download pdf (Page 20)

Malfunction Possible Cause / Solution

The washing machine does not start:

The door has not been closed. E40

• Close firmly the door.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The selector dial is not correctly positioned and the

button

8 has not been depressed.

• Please turn the selector dial and press the button 8

again.

The button

10 has been selected.

• If the laundry are to be washed immediately, cancel

the delay start

The machine does not fill:

The water tap is closed. E10

• Open the water tap.

The inlet hose is squashed or kinked.

E10

• Check the inlet hose connection.

The filter in the inlet hose is blocked. E10

• Clean the water inlet hose filter.

The door is not properly closed.

E40

• Close firmly the door.

What to do if...

IMPORTANT!

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily

without calling out an engineer. Before contacting your local Service Centre, please carry out the

checks listed below.

During machine operation it is possible that the red pilot light of button

8 flashes, few acoustic

signals sound and one of the following alarm codes appears on the display to indicate that the

machine is not working:

● E10: problem with the water supply

● E20: problem with water draining

● E40: door open.

Once the problem has been eliminated, press the button 8 to restart the programme. If after all

checks, the problem persists, contact your local Service Centre.

192997920_GB.qxd 14/12/2007 17.09 Pagina 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Comments to this Manuals

No comments

Zanussi ZWH 6145 User Manual Page 20

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWH 6145