Zanussi ZWI71000WA User Manual download pdf (Page 17)

• screw the pump cover again and close the

door.

Important! Every time you drain the water

through the emergency emptying hose you

must pour 2 litres of water into the main wash

compartment of the detergent drawer and then

run the drain programme. This will activate the

ECO Valve device avoiding that part of the

detergent remains unused at next washing.

What to do if…

Certain problems are due to lack of simple

maintenance or oversights, which can be

solved easily without calling out an engineer.

Before contacting your local Service Centre,

please carry out the checks listed below.

During machine operation it is possible that the

red pilot light of button 5 blinks to indicate that

the machine is not working.

It is possible to recognize the fault machine by

the number of button 5 light flashes. If the num-

ber of flashes is different from the ones indica-

ted below, this is related to a fault that you can

not solve. In this case, contact your local Serv-

ice Centre.

Press simultaneously the buttons 4 and 5 for a

few seconds. The red button 5 light will flash

for a short time as described (the green flash is

not to be considered) :

• 4 flashes = «The washing machine does

not start», follow the corresponding sug-

gestions in «Possible cause/Solutions» box

and restart the programme.

• 1 flash = «The machine does not fill»,

follow the corresponding suggestions in

«Possible cause/Solutions» box and restart

the programme.

• 2 flashes = «The machine does not

empty and/or does not spin», follow the

corresponding suggestions in «Possible

cause/Solutions» box and restart the pro-

gramme.

Once the problem has been eliminated, press

the button 5 to restart the programme. If after

all checks, the problem persists, contact your

local Service Centre.

Problem Possible cause/Solution

The washing machine does

not start:

The door has not been closed (the button 5 red light blinks).

• Close the door firmly.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The programme selector dial is not correctly positioned and the button 5

has not been pressed.

• Please turn the selector dial and press the button 5 again.

The delay start has been selected.

• If the laundry are to be washed immediately, cancel the delay start.

www.zanussi.com

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments

Zanussi ZWI71000WA User Manual Page 17

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWI71000WA