Zanussi ZWSG7121V User Manual download pdf (Page 17)

Problem Possible solution

The appliance does not

drain the water.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the drain filter is not clogged. Clean the filter, if nec-

essary. Refer to 'Care and cleaning'.

• Make sure that the connection of the drain hose is correct.

• Set the drain programme if you set a programme without drain

phase.

• Set the drain programme if you set an option which ends with water

in the tub.

The spin phase does not

operate or the washing cy-

cle lasts longer than usual-

ly.

• Set the spin programme.

• Make sure that the drain filter is not clogged. Clean the filter, if nec-

essary. Refer to 'Care and cleaning'.

• Adjust manually the items in the tub and start the spin phase again.

This problem may be caused by balance problems.

There is water on the floor. • Make sure that the couplings of the water hoses are tight and there

is not water leakages.

• Make sure that the drain hose have no damages.

• Make sure you use the correct detergent and the correct quantity of

it.

You cannot open the appli-

ance door.

• Make sure that the washing programme is finished.

• Set the drain or the spin programme if there is water in the drum.

The appliance makes an

unusual noise.

• Make sure the levelling of the appliance is correct. Refer to 'Installa-

tion'.

• Make sure that the packaging and/or the transit bolts are removed.

Refer to 'Installation'.

• Add more laundry in the drum. The load may be too small.

The washing results are

not satisfactory.

• Increase the detergent quantity or use a different detergent.

• Use special products to remove the stubborn stains before you

wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

You cannot set an option. • Make sure that you press only the wanted button(s).

After the check, activate the appliance. The

programme continues from the point of interruption.

If the problem occurs again, contact the Authorised

Service Centre.

If the display shows other alarm codes. Deactivate

and activate the appliance. If the problem

continues, contact the Service.

SERVICE

We recommend the use of original spare parts.

When contacting the Authorised Service Centre,

make sure that these data are available. You can

find the information on the rating plate: model, PNC

and Serial Number. (Mod., Prod. No., Ser. No.)

TECHNICAL DATA

Dimension Width/ Height/ Depth/ To-

tal depth

595 mm / 850 mm / 380 mm / 420 mm

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi ZWSG7121V User Manual Page 17

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWSG7121V