Zanussi ZES 3921 IBA User Manual download pdf (Page 19)

Disposal of the appliance

• To prevent the risk of physical injury or dam-

age

– Disconnect the appliance from the power

supply.

– Cut off the mains cable where it connects

with the appliance and discard it.

– Speak to your local authorised facilities for

disposal of your appliance.

Installation

Installation

Warning! Read and follow the

instructions carefully. There is a risk of

injury or damage to the appliance.

• Make sure that the appliance is not damaged

because of transportation. Do not connect a

damaged appliance. If it is necessary, speak

to the supplier.

• Installation and connection of the ap-

pliance to the power supply must only

be done by qualified personnel.

• Only use built-in appliances after you assem-

ble the appliance into correct built-in units

and work surfaces that obey the standards.

• Do not change the specifications or modify

this product. There is a risk of injury or dam-

age to the appliance.

• Fully obey the laws, ordinances, directives

and standards in force in the country where

you use the appliance (safety regulations, re-

cycling regulations, electrical safety rules

etc.).

• Keep the minimum distances to other appli-

ances and units.

• Install anti-shock protection, for example in-

stall the drawers only with a protective panel

directly below the appliance.

• If the fixing bracket is near to the terminal

block, always make sure the connection ca-

ble does not come in contact with the edge

of the bracket.

• Prevent damage of the cut surfaces of the

worktop against moisture with a correct seal-

ant!

• Seal the appliance to the worktop with no

space left with a correct sealant.

• Prevent damage of the bottom of the appli-

ance from steam and moisture, e.g. from a

dishwasher or oven.

• Do not install the appliance adjacent to

doors and below windows. Hot cookware

can be hit off the hob when you open doors

or windows.

• Disconnect the appliance from the elec-

trical supply, before you do mainte-

nance work or cleaning.

Warning! Risk of injury from electrical

current. Carefully obey the instructions for

electrical connections.

• The electrical mains terminal is live.

• Make the electrical mains terminal free of

voltage.

• Install correctly to give anti-shock protection.

• Loose and incorrect mains plug and socket

connections can make the terminal become

too hot.

• A qualified electrician must install the clamp-

ing connections correctly.

• Use a strain relief clamp on cable.

• Use the correct mains connection cable and

replace the damaged mains cable with the

proper cable type. Speak to your local Serv-

ice Centre.

The appliance must have the electrical installa-

tion which lets you disconnect the appliance

from the mains at all poles with a contact open-

ing width of minimum 3 mm. You must have

correct isolation devices: line protecting cut-

outs, fuses (screw type fuses removed from the

holder), ground leakage trips and contactors.

The manufacturer is not responsible for

any injury to persons and pets or damage

to property caused by failure to obey

these requirements.

19

www.zanussi.com

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Comments to this Manuals

No comments