Zanussi ZKN7147J User Manual download pdf (Page 20)

Problem Possible cause/Solution

The washing machine does not start:

The door has not been closed.

• Close the door firmly.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The selector dial is not correctly positioned and/or the button 7 has not been

pressed.

• Please turn the selector dial and press the button 7 again.

The delay start has been selected.

• If the laundry are to be washed immediately, cancel the delay start.

The Child Safety Lock has been activated.

• Deactivate the Child Safety Lock.

The machine does not fill:

The water tap is closed.

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose or in the inlet valve filter are blocked.

• Clean the water inlet filters (see ‘Cleaning the water inlet filters’ for more

details).

The door is not properly closed.

• Close the door firmly.

The machine fills then empties im-

mediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «Water drainage» section.

The machine does not empty and/or

does not spin:

The drain hose is squashed or kinked.

• Check the drain hose connection.

The drain filter is clogged.

• Clean the drain filter.

An option or a programme that ends with the water still in the tub or that elimi-

nates all the spinning phases has been selected.

• Select the draining or spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Zanussi ZKN7147J User Manual Page 20