Available options:
Super Quick
Short cycle for lightly soiled items or for laundry which
needs only freshening up. We recommend you to reduce
the fabrics loading.
Extra Rinse
This appliance is designed to save energy. If it necessary
to rinse the laundry using an extra quantity of water (extra
rinse), select this option. Some additional rinses will be
performed. This option is recommended for people who
are allergic to detergents, and in areas where the water is
very soft.
Start Pause
This button allows you to start or to interrupt the selected
programme.
Delay Start
The programme can be delayed from 30 min - 60 min - 90
min, 2 hours and then by 1 hour up to a maximum of 20
hours by means of this button.
Door light
The pilot light 9 illuminates when the programme starts
and indicates if the door can be opened:
• light on: the door cannot be opened. The machine is
working or has stopped with water left in the tub.
• light off: the door can be opened. The programme is
finished or the water has been emptied out.
• light blinking: the door is opening in a few minutes.
10 Display
10.1 10.2
The display shows the following information:
10.1: Child safety lock
This device permits you to leave the appliance unattended
during it's functioning.
10.2:
• Duration of the selected programme
After selecting a programme, the duration is displayed
in hours and minutes (for example
). The dura-
tion is calculated automatically on the basis of the
maximum recommended load for each type of fabric.
After the programme has started, the time remaining is
updated every minute.
• Selected drying time
After selecting a drying programme the drying time is
shown in minutes or hours and minutes. After the pro-
gramme has started, the time remaining is updated ev-
ery minute.
• Delayed start
The Selected delay set by pressing the relevant button
appears on the display for a few seconds, then the du-
ration of the selected programme is displayed again.
The delay time value decreases by one unit every hour
and then, when 1 hour remains, every minute.
• Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example
(see paragraph
«What to do if...»).
• Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed at
the bottom of the display for a few seconds and the in-
tegrated red light of button 7 start flashing.
• End of programme
When the programme has finished the flashing zero (
) is displayed, the pilot light 9 and the pilot light of
button 7 go out and the door can be opened.
6
Comments to this Manuals