Zanussi ZWI71000WA User Manual download pdf (Page 15)

Caution! When the appliance is in use

and depending on the programme selected

there can be hot water in the pump.

Never remove the pump cover during a wash

cycle, always wait until the appliance has

finished the cycle, and is empty. When refitting

the pump cover, ensure it is securely re-

tightened so as to stop leaks and young

children being able to remove it.

Cleaning the water inlet filters

Important! If the appliance doesn't fill, takes

long to fill with water, the starting button blinks

yellow or the display (if available) shows the

relevant alarm (see chapter "What to do if..." for

more details), check if the water inlet filters are

blocked .

To clean the water inlet filters:

• Turn off the water

tap.

• Unscrew the hose

from the tap.

• Clean the filter in

the hose with a stiff

brush.

• Screw the hose back onto the tap. Make

sure the connection is tight.

• Unscrew the hose from the machine. Keep

a rag nearby because some water may flow.

• Clean the filter in the valve with a stiff brush

or with the piece of cloth.

35°

45°

• Screw the hose back to the machine and

make sure the connection is tight.

• Turn on the water tap.

Frost precaution

If the machine is exposed to temperatures be-

low 0°C, certain precautions should be taken.

• Turn off the water tap.

• Unscrew the inlet hose.

• Place the end of the emergency emptying

hose and that of the inlet hose in a bowl

placed on the floor and let water drain out.

• Screw the water inlet hose back on and repo-

sition the emergency emptying hose after

having put the cap on again.

• When you intend to start the machine up

again, make sure that the room temperature is

above 0°C.

Emergency emptying out

If the water is not discharged, proceed as fol-

lows to empty out the machine:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has cooled

down;

• open the pump door;

• place a bowl on the floor and place the end

of the emergency emptying hose into the

bowl. Remove its cap. The water should drain

by gravity into the bowl. When the bowl is full,

put the cap back on the hose. Empty the

bowl. Repeat the procedure until water stops

flowing out;

• clean the pump if necessary as previously de-

scribed;

• replace the emergency emptying hose in its

seat after having plugged it;

www.zanussi.com

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comments to this Manuals

No comments

Zanussi ZWI71000WA User Manual Page 15

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWI71000WA