Zanussi ZWI71000WA User Manual download pdf (Page 16)

• screw the pump cover again and close the

door.

Important! Every time you drain the water

through the emergency emptying hose you must

pour 2 litres of water into the main wash

compartment of the detergent drawer and then

run the drain programme. This will activate the

ECO Valve device avoiding that part of the

detergent remains unused at next washing.

What to do if…

Certain problems are due to lack of simple

maintenance or oversights, which can be solved

easily without calling out an engineer. Before

contacting your local Service Centre, please

carry out the checks listed below.

During machine operation it is possible that the

red pilot light of button 5 blinks to indicate that

the machine is not working.

It is possible to recognize the fault machine by

the number of button 5 light flashes. If the num-

ber of flashes is different from the ones indica-

ted below, this is related to a fault that you can

not solve. In this case, contact your local Serv-

ice Centre.

Press simultaneously the buttons 4 and 5 for a

few seconds. The red button 5 light will flash for

a short time as described (the green flash is not

to be considered) :

• 4 flashes = «The washing machine does

not start», follow the corresponding sugges-

tions in «Possible cause/Solutions» box and

restart the programme.

• 1 flash = «The machine does not fill», fol-

low the corresponding suggestions in «Possi-

ble cause/Solutions» box and restart the pro-

gramme.

• 2 flashes = «The machine does not emp-

ty and/or does not spin», follow the corre-

sponding suggestions in «Possible cause/

Solutions» box and restart the programme.

Once the problem has been eliminated, press

the button 5 to restart the programme. If after all

checks, the problem persists, contact your local

Service Centre.

Problem Possible cause/Solution

The washing machine does

not start:

The door has not been closed (the button 5 red light blinks).

• Close the door firmly.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The programme selector dial is not correctly positioned and the button 5

has not been pressed.

• Please turn the selector dial and press the button 5 again.

The delay start has been selected.

• If the laundry are to be washed immediately, cancel the delay start.

www.zanussi.com

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments

Zanussi ZWI71000WA User Manual Page 16

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWI71000WA