Zanussi ZWNB6140L User Manual

ENUser manualWashing MachineZWNB 6120 LZWNB 6140 L

For the compatibility among the washingprogrammes and the options see chapter«Washing Programmes».Select the Delay Start by pressing button6Before you

nates. The door remains locked to indicate thatthe water must be emptied out before openingthe door. During this time, the drum continuesto run at reg

Detergents and additivesGood washing results also depend on thechoice of detergent and use of the correctquantities to avoid waste and protect the env

Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompartme

Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompartme

Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompartme

Cleaning the pumpThe pump should be inspected regularly andparticularly if:• the appliance does not empty and/or spin;• the appliance makes an unusual

Cleaning the water inlet filtersImportant! If the appliance doesn't fill, takeslong to fill with water, the starting button blinksyellow or the d

Important! Every time you drain the waterthrough the emergency emptying hose you mustpour 2 litres of water into the main washcompartment of the deter

Problem Possible cause/SolutionThe machine does not emptyand/or does not spin:The drain hose is squashed or kinked (the button 5 red light blinks).• C

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _

Problem Possible cause/SolutionSpinning starts late or themachine does not spin:The electronic unbalance detection device has cut in because the laund

Consumption valuesThe data of this table are approximate. Different causes can change the data: the quantity andtype of laundry, the water and ambient

After removing all thepackaging, carefullylay machine on it'sback to remove thepolystyrene base fromthe bottom.Remove the powersupply cable and t

1. Connect the ap-propriate end ofthe hose to a tapwith a 3/4”thread. Alwaysuse the hosesupplied with theappliance.35°45°2. Connect the other end of t

Min. 60 cm (23.6”)Max. 90 cm (35.4”)If your drain hoselooks like this (seebeside) you do not re-quire the “U” piece”.Just push the hosefirmly in to th

>PP<=polypropyleneThis means that they can be recycled by dis-posing of them properly in appropriate collec-tion containers.Ecological hintsTo s

26 www.zanussi.com

27www.zanussi.com

www.zanussi.com/shop 192977700-A-162013

• Obey the maximum load volume of 8 kg (refer to the “Programmechart” chapter).• If the supply cord is damaged, it must be replaced by the manu-factur

Water connection• Make sure not to cause damage to the waterhoses.• The appliance is to be connected to the wa-ter mains using the new supplied hose-s

Product description1Detergent dispenser drawer2Control panel3Door opening handle4Rating plate5Drain pump6Adjustable feet123456Detergent dispenser draw

Child safetyMake sure that children or pets do not climb in-to the drum. To prevent children and pets be-coming trapped inside the drum this machine i

Rinse hold By selecting this function the water of the lastrinse is not emptied out to prevent the fabricsfrom creasing. Before opening the door it wi

Daily useLoad the laundryOpen the door bycarefully pulling thedoor handle out-wards. Place thelaundry in the drum,one item at a time,shaking them out

MAX• Measure out thedetergent.• Pour the powderdetergent into themain wash com-partment .• Remove the remaining powder formthe flap.• There is remain