Zanussi ZRB634W User Manual download pdf (Page 20)

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Location

The appliance should be installed well away from sources

of heat such as radiators, boilers, direct sunlight etc. En-

sure that air can circulate freely around the back of the

cabinet. To ensure best performance, if the appliance is

positioned below an overhanging wall unit, the minimum

distance between the top of the cabinet and the wall unit

must be at least 100 mm . Ideally, however, the appliance

should not be positioned below overhanging wall units.

Accurate levelling is ensured by one or more adjustable

feet at the base of the cabinet.

Warning! It must be possible to disconnect the

appliance from the mains power supply; the plug

must therefore be easily accessible after installation.

min.100 mm

20 mm

Rear spacers

You can find the two spacers in the bag with documenta-

tion.

Do these steps to install the spacers:

1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.

Levelling

When placing the appli-

ance ensure that it stands

level. This can be achieved

by two adjustable feet at

the bottom in front.

Removing the shelf holders

Your appliance is equipped with shelf retainers that make

it possible to secure the shelves during transportation.

To remove them proceed

as follows:

1. Move the shelf hold-

ers in the direction of

the arrow (A).

2. Raise the shelf from

the rear and push it

forward until it is

freed (B).

3. Remove the retainers

(C).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Comments to this Manuals

No comments

Zanussi ZRB634W User Manual Page 20

Comments to this Manuals

Related products and manuals for Combi-fridges Zanussi ZRB634W