ENUser manualFreezerZFT11110XA
3. If necessary, replace the defective doorgaskets. Contact the Service Center.Technical data Dimension Height 850 mm Width 595 mm Depth 63
tween the wall and the cabinet must be at least10 mm to allow the door to open enough sothat the shelves can be removed.Warning! min.100 mm15 mm15 mmI
ABCDEImportant! The wires in the mains lead arecoloured in accordance with the followingcode:A Green and Yellow: EarthC Brown: LiveD Blue: NeutralAs t
13www.zanussi.com
14 www.zanussi.com
15www.zanussi.com
www.zanussi.com/shop 212000268-A-042013
ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
ponents of the refrigerant circuit becomedamaged.If the refrigerant circuit should become dam-aged:– avoid open flames and sources of ignition– thorou
immediately to the place you bought it. In thatcase retain packing.• It is advisable to wait at least four hours be-fore connecting the appliance to a
be stopped by pressing the Acoustic Sig-nal Stop and Fast Freeze Switch once.7. When switching on the freezer for the firsttime, the Red Alarm Indicat
First useCleaning the interiorBefore using the appliance for the first time,wash the interior and all internal accessorieswith lukewarm water and some
• water ices, if consumed immediately after re-moval from the freezer compartment, canpossibly cause the skin to be freeze burnt;• it is advisable to
In order tospeed up thedefrosting proc-ess, place a pot ofwarm water in thefreezer compart-ment. In addition,remove pieces ofice that breakaway before
Problem Possible cause Solution Large quantities of food to be fro-zen were put in at the same timeWait some hours and then check thetemperature agai
Comments to this Manuals