ENUser manualFridge-FreezerZBT3234
• Loosen the upper pinand remove the spacer.• Remove the upper pinand the upper door.• Loosen the middlehinge.• Remove the lower door.• Loosen the low
12Install the appliance in theniche.Push the appliance in thedirection of the arrows (1)until the upper gap coverstops against the kitchenfurniture. M
HaHcPush the part (Hc) on thepart (Ha).HaHb8 mmOpen the appliance doorand the kitchen furnituredoor at an angle of 90°.Insert the small square(Hb) int
14
www.zanussi.com/shop 212721411-00-11052010
ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4First use _ _ _ _ _ _ _ _ _ _ _ _ _
squashed or damaged power plug may overheatand cause a fire.3. Make sure that you can come to the mains plugof the appliance.4. Do not pull the mains
Environment ProtectionThis appliance does not contain gasses whichcould damage the ozone layer, in either its refrig-erant circuit or insulation mater
Frozen Food CalendarThe symbols show different types of frozen goods.The numbers indicate storage times in months for theappropriate types of frozen g
Butter and cheese: these should be placed in special air-tight containers or wrapped in aluminium foil or poly-thene bags to exclude as much air as po
It is important to periodically clean the defrost waterdrain hole in the middle of the refrigerator compartmentchannel to prevent the water overflowin
Problem Possible cause Solution The lamp is defective. Refer to "Replacing the lamp".The compressor operates con-tinually.The temperature i
7. Open the door. Make sure that the light comes on.Closing the door1. Clean the door gaskets.2. If necessary, adjust the door. Refer to "Install
Comments to this Manuals