Zanussi ZDF2020 User Manual download pdf (Page 6)

Water hardness Water hardness setting

°dH °TH mmol/l Clarke manually electronically

51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10

43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 9

37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 8

29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 7

23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 6

19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 5

15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4

11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3

4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2

< 4 < 7 < 0,7 < 5

1) No use of salt required.

You must set the water softener manually and elec-

tronically.

Manual adjustment

The appliance is set at the factory at position 2.

1 2

Set switch to position 1 or

Electronic adjustment

The water softener is set at the factory at level 5.

1. Press and hold the start/cancel button. Turn the pro-

gramme knob clockwise until the programme marker

agrees with the first washing programme on the con-

trol panel.

2. Release the start/cancel button when the on/off indi-

cator light and the start/cancel indicator light start to

flash.

– At the same time, the end indicator light flashes to

show the level of the water softener.

Example:

5 flashes, pause, 5 flashes, pause, etc... = level 5

3. Press the start/cancel button one time to increase the

water softener level by one step.

The end indicator light shows the new level.

4. Turn the programme knob to the off position to save

the operation.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of salt

that are not applicable for dishwashers cause

damage to the water softener.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Zanussi ZDF2020 User Manual Page 6