Zanussi ZDF6745 User Manual download pdf (Page 23)

The wash results are not satisfactory

The dishes are not clean • The wrong washing programme has been selected.

• The dishes are arranged in such a way as to stop

water reaching all parts of the surface. The baskets

must not be overloaded.

• The spray arms do not rotate freely due to incorrect

arrangement of the load.

• The filters in the base of the washing compartment

are dirty or incorrectly positioned.

• Too little or no detergent has been used.

• Where there are limescales deposits on the dishes;

the salt container is empty or the incorrect level of

the water softener has been set.

• The drain hose connection is not correct.

• The salt container cap is not properly closed.

The dishes are wet and dull • Rinse aid was not used.

• The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on

glasses and dishes

• Decrease rinse aid dosing.

Water drops have dries onto glasses and dishes • Increase rinse aid dosing.

• The detergent may be the cause. Contact the de-

tergent manufacturer’s consumer care line.

If after all these checks, the problem persists,

contact your local Service Force Centre.

Technical data

Dimensions Width x Height x Depth (cm) 60,0 x 85,0 x 61,0

Electrical connection

Voltage - Overall power - Fuse

Information on the electrical connection is given on the rating plate on the

inner edge of the dishwasher’s door.

Water supply pressure Minimum - Maximum

(MPa)

0,05 - 0,8

Capacity place settings 12

Max. weight kg 40,5

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

No comments

Zanussi ZDF6745 User Manual Page 23